Consumer Electronics

Engineering considerations

Cost and volume consistency

Consumer projects are usually price-sensitive mid-to-high volume, where panel utilisation and stable yield matter more than process limits. Combined monthly capacity across the two sites is 160,000 m², supporting production ramp-up.

Thin and slim construction

Wearables and handhelds are thickness-constrained; flex, HDI or carbon-ink processes reduce stack height. Board thickness down to 0.2 mm is available, with the actual limit reviewed against layer count and material.

Applicable board types

The board types below are the ones that come up most often in consumer electronics applications. Each link goes to that board type's capability page with material, layer-count and process ranges. Combined constructions such as hybrid lamination or embedded copper are also available.

• Single-Sided PCB
• Double-Sided PCB
• HDI PCB
• Flexible PCB
• Carbon Ink PCB

Production examples

The examples below are desensitized: no customer information, exact outline dimensions or full stack-up notation.

• Interconnect inside industrial control equipment

  2L · Flex PI · 0.2 mm · ENIG 2µin · Mid-size (long edge roughly 100–250 mm)

  • Double-sided PI flex · coverlay on both sides
  • Total thickness 0.2 mm

• Consumer terminal and smart-home module

  4L · FR-4 ITEQ IT-180A · 1.6 mm ±10% · 沉银 / Immersion silver · Mid-size (long edge roughly 100–250 mm)

  • Immersion silver · vacuum anti-oxidation packaging
  • Via-in-pad · press-fit holes · customer stack-up

Production experience

Related end-product categories already in volume production include Documented end-product categories in consumer electronics include smart watches and blood glucose meters.. Specific project details are covered by non-disclosure agreements and are not published.

Applicable certifications

• ISO 9001:2015 Quality Management System — 120622-2012-AQ-RGC-RvA
• ISO 14001:2015 Environmental Management System — F027-2026-E-00285-R5-05
• RoHS Restricted Substances Test Report — WTH23H12270526C
• REACH SVHC Test Report — WTH24H10245077C
• UL Recognized Component (USA) — Wiring, Printed — E326765 (ZPMV2)
• UL Recognized Component (Canada) — Wiring, Printed — E326765 (ZPMV8)

Frequently asked questions

How long does a consumer electronics project take from enquiry to prototype?

Quotations are returned within 30 minutes as a rule. Expedited prototype lead times run by layer count: double-sided 24 hours, 4-layer 48 hours, 6–8 layer 72 hours, 10–12 layer 96 hours; single-stage HDI at 6 layers is 48 hours. Volume lead times are set by order quantity.

Which inspection and material documents can you supply?

As standard we supply a certificate of conformance, material certifications with lot records, and electrical test records; impedance test reports and microsection analysis are available on request. Acceptance can be run to IPC-6012 Class II or Class III, which must be stated on the order.